Car Wrapping Tips

If you’re new to the field of car wrapping, then here are the top 10 tips to help you for perfect wrapping-

Inspect the vehicle

When a person requests a car wrap, make sure you properly inspect the car first and preferably snap photographs for further references. If you’re looking for more tips, wrapping tips¬†has it for you.You will have the ability to inspect the situation of the paint, evaluate curves and determine any extra added accessories. Understanding what you are working with will let you to give a precise quote.

Take before and after photos

Taking the permission of the customer, take before and after pictures. Not only you’re going to benefit from excellent pictures on your brochures, website, and other advertising stuff, it’s going to protect your organization in case the wrapping is to be removed against flawed or defective color work.

Examine the vehicle

Measure the precise height and width of every aspect of the car in addition to the rear, top, bumpers and bonnet to help out with precise scaling of the images. Note down any type of body breaks in the car, it’ll help you to properly print the panels.

Work according to your customer’s expectations

Know what your customer wants, what’s their objective behind the car wrapping. From your previous customers know about their experience with the material used, longevity, etc. This will help you to work better for the quality deliver in future

Keep it in

During colder months, keep the vehicle inside for one more day before delivering it back to the customer. A fall in outside temperatures very soon after the installation might result in media failure. Additionally, a fresh pair of eyes the other day will allow you to make sure about any left out areas, hidden places, deep contours, warmed and extended areas.

Flawlessly done

Ideally a smooth wrap would be great, but eventually you’ve got to panel or seam the wrapping. But one may ponder over which is better, vertical or horizontal sections? Horizontal panels drive you to lay bottom to top and usually are big sections – get them on straight and you’re completed. With vertical panels, you’ll be able to work with smaller parts which are easier to take care of. However, it also depends on one’s preference and choice.

Price it properly

Your prices must be determined by 3 aspects:

Total square meters of the media used

Designing and production time for the images

Time required to install it.

It’s important to know about the customer’s budget before designing the wrap.

Attention to detail

You probably may have the best design, most efficient printer and media, but if you don’t know how to install it properly. You should have the essentials to have a great installation for perfect wrap. A perfectly done wrapping doesn’t have noticeable bubbles, seams, or any other imperfections. Closely have a look at your wrap even for the smallest error.

Customer approval

Now, consult with the customer regarding the final wrap. Show a few samples on the media you intend to use and ensure their approval for color and image quality. Make sure you get a signature as well as a deposit prior to any print commences.

Check your wrap down the road

Invite back your customer in 6 months or after a year to check and assess the looks of the wraps. Check the image quality, are the vinyl holding up properly and so on. The wrapping is an advertisement for the company too and identifying any issue areas and solving them early may just assist your company move forward and be ahead of the competition.

This entry was posted in Automotive, Business and tagged . Bookmark the permalink.